For B140RTN02 N140FGE B140RTN03 B140RW01 Matrix Controller Board DIY Kit 1600x900 2Mini-HDMI 1600*900 Laptop Display EDP-30 Pin

Please read the following instructions carefully before purchasing:

  1, Please ensure that your screen can still power on and display normally. If your screen is damaged, please do not place an order as the controller board cannot repair or drive the damaged screen. You can refer to our demonstration video to connect the screen to the original laptop for testing. Or use a screen tester to test.

  2, We will install driver firmware for free according to your screen model in order to use it properly. So, please select the model from the list that is exactly the same as your screen (including the model suffix). If your screen model is not on our sales list. Please send us a photo of the model label and signal port on the back of the screen first to help you confirm (do not place an order blindly to avoid unnecessary disputes). As shown in the reference photo below:

Controller board description:

This controller board only suitable for EDP 30-pin (0.5mm space) Laptop screen.

Input power: DC12V 3A or DC 5V 3A USB mobile phone charger (via micro USB)

Please note: Do not use power adapters with voltages exceeding 12 volts. This will damage the control board.

Video/Audio input: 2 Mini-HDMI

Audio output: Earphone jack, PH1.25 4-pin speaker port (requires self purchase of speaker)

OSD Language: Chinese, English, Spanish, French, Italian, Japanese, Korean

When there is no correct signal source input. The controller board automatically enters standby mode. The keypad indicator light changes from green to red. The button does not respond and can only be turned on or off.

Packaging List:

1 Pcs x Controller board

1 Pcs x EDP 30-pin signal cable

1 Pcs x Keyboard with cable